ETI ThermaData WiFi Quick Start Manual
  1. Manuals
  2. Brands
  3. ETI Manuals
  4. Thermometer
  5. ThermaData WiFi
  6. Quick start manual

ETI ThermaData WiFi Quick Start Manual

Hide thumbs
1
2

Advertisement

Table of Contents

Enlarged version

BATTERY CHANGING

You will need a flat-headed screwdriver (provided in box).
1. Place the instrument display-down on a solid surface.
2. Unscrew and remove the battery cover.
3. Remove batteries (top one first).
4. Fit new batteries, noting the polarities marked on the plastic.
5. Replace battery cover, then tighten battery screw.
6. Dispose of the old batteries appropriately.
If this is the first time the instrument has been used then it will need setting up in
ThermaData Studio. If it has previously been used then it will attempt to reconnect
to the WiFi and continue recording.
WARNING: IPA and other solvents may cause damage to the case and screen of
this instrument.
INSTRUMENT RECORD CARD
Serial No. _____________________________________________________
Calibrated by ________________________Date _____________________
0 °C
This instrument has been checked or calibrated against reference instrument(s) calibrated
by a UKAS Accredited Calibration Laboratory.
PLEASE NOTE: Due to regular software updates, please visit the download page on
our website etiltd.com/downloads to ensure you have the latest version.
Electronic Temperature Instruments Ltd
Worthing · West Sussex · BN14 8HQ
tel: 01903 202151 · email: sales@etiltd.com
www.etiltd.com
100 °C
545-921/29.08.17
ThermaData
®
Quick Start Guide
WiFi

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ThermaData WiFi and is the answer not in the manual?

Questions and answers

Related Manuals for ETI ThermaData WiFi

Summary of Contents for ETI ThermaData WiFi

  • Page 1 BATTERY CHANGING You will need a flat-headed screwdriver (provided in box). 1. Place the instrument display-down on a solid surface. 2. Unscrew and remove the battery cover. 3. Remove batteries (top one first). ThermaData WiFi ® 4. Fit new batteries, noting the polarities marked on the plastic. 5.
  • Page 2 (Wait for the green bar to load across, whilst the software scans for available networks) 4. Locate the item that corresponds to your ThermaData WiFi device. It will contain the serial number printed on the rear label of your device. (For example: ThermaData WiFi D17061188) 5.

Table of Contents