Settings in the main menu
4.2.4 Setting the room temperature
The display shows the current room temperature in normal
mode.
Turn the selector anticlockwise in the Auto or On operating
mode to reduce the set value for room temperature, or
clockwise to increase it. The selected temperature flashes for
three seconds.
The new temperature appears briefly on the display and also
the switching time when this temperature applies.
pmam
Fig. 12
Room temperature set value
4.3
Key lock
When the key block is active, interaction between the user and
control unit is not possible. Key lock appears when the key is
pressed or the selector is pressed/turned.
Activating the key block
To activate the key block:
▶ Press and hold the select heating key and selector
simultaneously until Key lock is displayed.
After a short time, the standard display reappears.
Switching the key block off
To deactivate the key block:
▶ Press and hold the select heating key and selector
simultaneously until Key lock is no longer displayed.
After a short time, the standard display reappears.
10
5
▶ Press the menu key until the main menu is displayed.
Fig. 13
[1] Heating
[2] DHW
[3] Holiday
0010009671-002
[4] Information
[5]
▶ Turn the selector to select the a symbol.
▶ Press the selector to open the menu.
▶ Press the
The display backlighting switches off after 20 seconds of user
inactivity until a key is pressed again or the selector is pressed/
turned.
The standard display reappears after 60 seconds of user
inactivity.
Settings in the main menu
1
2
3
pmam
Main menu
settings
A frame appears round the selected symbol.
Flashing arrows indicate that additional menus are
available.
key to return to the higher-level menu.
Comfort+ II RF – 6720886122 (2018/07)
4
5
0010009672-002