Related Manuals for Worcester Comfort+ I RF/Stat RF
Summary of Contents for Worcester Comfort+ I RF/Stat RF
-
Page 1: Table Of Contents
Installation and operating instructions Control unit and key Comfort+ I RF/Stat RF... -
Page 2: Table Of Contents
WARNING: 3.1.2 Putting the control unit into operation ..5 3.1.3 Installing Comfort+ I RF/Stat RF control unit..6 WARNING indicates that severe to life-threatening personal injury may occur. -
Page 3: General Safety Instructions
▶ Observe the notices regarding frost Function as room temperature-dependent controller protection. The Comfort+ I RF/Stat RF controls the heat source via the ▶ Due to the additional functions, e.g. room temperature. The control unit is not suitable for controlling heat sources from other manufacturers. -
Page 4: User Interface
▶ Reduce the desired room temperature, until °C OFF appears. When the heating is switched °F off, frost protection for the room is also switched off. Frost protection of the heat source remains active. Comfort+ I RF/Stat RF – 6720886119 (2018/07) -
Page 5: Installation And Commissioning
For information on the heat source, Technical documentation for the heat source. These instructions contain the installation and operating instructions for the Comfort+ I RF/Stat RF control unit. 00:00 DD/MM/YYYY 3.1.1 Installing the key ▶ Isolate the mains electrical supply and secure against unintentional re-connection. -
Page 6: Installing Comfort+ I Rf/Stat Rf Control Unit
Installation and commissioning 3.1.3 Installing Comfort+ I RF/Stat RF control unit Releasing control unit from wall socket ≥ 1000 °C °F Fig. 7 Releasing control unit from wall socket °C °C °F °F Wall-mounted installation Find a position with good signal strength before starting the wall-mounted installation of the control unit. -
Page 7: Start-Up After A Reset
▶ Press the selector. ▶ The signal strength is displayed as a number from 0 to 10. [0] No reception [1-3] Poor reception [4-6] Good reception [7-10] Very good reception ▶ Close the service menu. Comfort+ I RF/Stat RF – 6720886119 (2018/07) -
Page 8: Troubleshooting
For all other fault codes, which the heat source reports Risk of explosion if the battery is replaced with an incorrect type. Table 3 Fault codes for the specialist ▶ Use specified batteries only. Comfort+ I RF/Stat RF – 6720886119 (2018/07) -
Page 9: Product Data For Energy Consumption
Simplified EU Declaration of Conformity regarding radio equipment Bosch Thermotechnik GmbH hereby declares, that the Comfort+ I RF/Stat RF product described in these instructions complies with the Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available on the Internet: worcester-bosch.co.uk. - Page 12 CONTROLS AND CONNECTIVITY TEAM: 0330 123 3641 APPOINTMENTS: 0330 123 9339 SPARES: 0330 123 9779 LITERATURE: 0330 123 9119 TRAINING: 0330 123 0166 SALES: 0330 123 9669 Bosch Thermotechnology Ltd. Cotswold Way, Warndon Worcester WR4 9SW United Kingdom Tel. 0330 123 9559 worcester-bosch.co.uk...