Advertisement
6. MAINTENANCE
6.1.
When the jack is not in use, the saddle must be in the lowest position to minimise ram and piston corrosion.
6.2.
Keep the jack clean and wipe off any oil or grease. Lubricate all moving parts with acid free oil.
6.3.
Before each use, follow the pre-check list to ensure components are in good working order. If any suspect item is found remove jack
from service and take necessary action to remedy the problem.
DO NOT use the jack if you believe it has been subjected to an abnormal load or shock load . If in doubt contact your local service agent.
6.4.
Periodically check the pump piston and piston rod for signs of corrosion. Clean exposed areas with a clean oiled cloth.
IMpORTaNT: All other maintenance and repair (including oil change) must only be undertaken by fully qualified personnel.
Contact your local authorised service agent.
6.5.
The oil cylinder is a sealed unit and in principle should not be accessed. To top up or change the oil remove oil plug.
The oil level should be just below the oil plug hole. Oil capacity: 1ltr.
WARNING! Only a good quality hydraulic Jack oil, such as SEALEY hYdRAULIC JACK OIL must be used, dO NOT use brake
fluid. dO NOT overfill as this will render the jack inoperative.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTEd FOR INCORRECT USE OF ThE JACK.
hydraulic products are only repaired by local service agents. we have service/repair agents in all parts of the UK.
. please telephone 01284 757500 to obtain address and 'phone number of your local agent. If your Jack is under guarantee
jacks to us
please contact your dealer.
6.6.
de-commissioning the Jack: Should the jack become completely unserviceable and require disposal, draw off the oil into an approved
container and dispose of the jack and the oil according to local regulations.
7. TROUBLEShOOTING
IMPORTANT! Although the following may identify a problem, we recommend the problem be resolved by an authorised service agent.
PROBLEM
Jack will not lift.
Jack will only lift halfway.
Raised load will not hold.
Poor lifting.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
CAUSE
No hydraulic oil, or defective suction valve or
delivery valve. Release valve is open.
Hydraulic oil low, or excess of hydraulic oil.
Defective valves, or defective piston packing.
Defective plunger packing.
Sole UK distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
SOLUTION
Contact authorised service agent.
Close release valve.
Check and correct level. See 6.5.
Contact authorised service agent.
Contact authorised service agent.
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
1250TR.V2
do not return
Issue: 2 - 13/10/09
Advertisement
