Operating Modes - Frico Thermowarm TWS Series Original Instructions Manual

GB

Operating modes

It is possible to choose between four modes
– comfort, reduced mode (night mode),
automatic mode or frost protection. Settings
for Comfort mode and Reduced mode are also
applied in the week program when used.
User menu
Select mode in the user menu:
Comfort mode
Reduced (night mode)
Automatic mode – weekly programme
Frost protection
OK
Confirm
Set the desired room temperature – set
point value (not for Auto).
OK
Confirm
For setting automatic mode – weekly programme,
see the section Weekly programme.
Set time and date
For week program. Time and date.
User menu
Select
Confirm
OK
Set the following:
- hour (24 h)
- minute
- weekday: Mon=1, Sun=7
- day/month
- year
Increase/decrease using +/-.
Confirm each step with OK.
18
Thermowarm TWS
Default settings
Temperature mode
Comfort mode
Reduced (night mode)
Frost protection
Quick commands
Press
OK
Display energy consumption
Potential to display energy consumption (kW)
for the past 24 hours / 7 days / 30 days. This
menu is only displayed when the heat output
is set (see Settings menu).
OK
Set point
21 °C
18 °C
See the Settings menu.
Quick command
Switch between current
room display tempera-
ture (actual value) and set
point value.
Switch between display
time, current room tem-
perature (actual value)
and set point value.
User menu
Select
Confirm
Switch between viewing consumption at
the various time intervals.
Range
5 - 30 °C
5 - 30 °C