Using The Telephone - OGATECH OG-R400 User Manual

OGATECH OG-R400

3 USING THE TELEPHONE

3.1 SWITCHING THE HANDSET ON/OFF
• Press and hold
• Press again
3.2 CHANGING THE LANGUAGE
Enter the "Handset" menu in order to change the language:
• Select "Menu" with the left menu key
• Press the navigator
• The "Handset" menu appears on the display. Select "OK".
• Use the navigator key to scroll through the menu and select "Language". The
arrows indicate that further options are available. To confirm the language press "OK".
The screen displays "English saved" if you have chosen English. Your handset's menus
will be in English.
• To return to the previous menu, select "Back".
3.3 MAKING A CALL
3.3.1 Direct dialling
• Press to obtain a line.
• Dial the number to be called.
• To hang up at the end of the call, press
3.3.2 Pre-dialling
With the pre-dialling feature you can enter and modify a number before making the call.
• Dial a number of up to 25 digits. Press the navigator key
pause. The screen displays a "P".
• Select "Clear" with the right menu key
screen displays: "Calling 123456789". To hang up at the end of the call, press
the handset back on the base.
3.4 RECEIVING A CALL
When you receive an external call, the screen displays: "External Call".
To take the call:
• Press (if the handset is not on its base/charger)
or
Lift the handset off its base (if the Auto Talk option is active) (see §"7.5 Auto Answer" ).
• The call in progress
about 15 seconds.
3.4.1 Adjusting the ring volume during incoming call
You can adjust the ring volume with the navigator key
The ring volume is displayed on the screen. There are 5 volume levels as well as the option
of turning the ringer off altogether, in which case "Volume Off" is displayed and
appears. This information remains on screen for about 3 seconds, or until the
pressed.
8
to switch the handset off.
or place it in the base to switch the handset back on.
key downwards twice.
icon appears on the screen. The call duration is displayed after
.
or put the handset back on the base.
upwards and hold to insert a
to correct. Press
or while the telephone is ringing.
and
to initiate the call. The
or put
icon
key is
OGATECH OG-R400