Related Manuals for Heinner VCRP002
Summary of Contents for Heinner VCRP002
- Page 1 Instructions Instrucțiuni de utilizare - RO Anleitung - D Eredeti használati utasítás - HU Ръководство за употреба - BG Instrukcja obsługi - PL www.heinner.com VCRP002...
- Page 2 ROTARY HAMMER Fig. A Fig. C Fig. B Fig. D...
-
Page 3: General Power Tool Safety Warnings
ROTARY HAMMER Thank you for choosing Heinner! GENERAL POWER TOOL SAFETY WARNINGS WARNING! • Read all safety warning and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and /or serious injury. • Save all warning and instructions for future reference. -
Page 4: Safety Warnings
ROTARY HAMMER Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tool are dangerous in the hands of untrained users. Maintain power tools. -
Page 5: Electric Safety
ROTARY HAMMER ADDITIONAL SAFETY WARNINGS FOR ROTARY HAMMERS Wear ear protectors. Exposure to noise can cause hearing loss. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. -
Page 6: Technical Data
ROTARY HAMMER TECHNICAL DATA Model VCRP002 Rated voltage 230V~50HZ Rated power input 1050 W No load speed 0-980/min Impact rate 0-5300/min Impact energy 3.4 J 13 mm Steel 30 mm Max drilling capacity in Masonry 30 mm Wood Protection class Machine weight 3.6 kg... - Page 7 ROTARY HAMMER Exchanging and removing drill bits Fig. A-B Before exchanging bits, remove the power plug from the wall socket. Inspect bits regularly during use, Blunt bits should be re-sharpened or replaced. Lightly oil the bit shaft before inserting it into the chuck. •...
-
Page 8: Maintenance
ROTARY HAMMER Chisel angle adjustment: for changing the angle of the chisel. When set under right switch back to position D. before using the tool. Chipping (chisel function): for chipping and small demolition jobs. User tips • Always use the machine with the side handle firmly anchored in place-you will not only work with more comfort, you will also work with more precision. - Page 9 ROTARY HAMMER RECYCLING Electrical and electronic equipment waste (DEEE) might contain dangerous materials which can have a negative impact on the environment and human health if not collected separately. This item is in conformity with the European Directive EU DEEE (2012/19/EU) and is marked with an electronic and electrical waste logo graphically represented in the image below.
Need help?
Do you have a question about the VCRP002 and is the answer not in the manual?
Questions and answers