Table of Contents
Advertisement
About this task
The following image indicates the location of the base cover and provides a visual representation of the installation procedure.
Steps
1. Place and align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (1>2>3>4) as indicated on the heat sink, replace the four screws (M2x3) that secure the heat sink to the system
board.
3. Adhere the tapes that secure the fan to the heat sink.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
After working inside your
computer.
30
Removing and installing components
Hide quick links:
Advertisement
Table of Contents
