Intended use b. Use safety equipment. Always wear eye protection. Your Black & Decker drill/screwdriver has been designed for Safety equipment such as dust mask, non-skid safety screwdriving applications and for drilling in wood, metal, shoes, hard hat, or hearing protection used for plastics and soft masonry.
Page 5
Use of the power tool for operations different from those When disposing of batteries, follow the instructions given intended could result in a hazardous situation. in the section “Protecting the environment”. 5. Battery tool use and care Chargers a. Ensure the switch is in the off position before Use your Black &...
Page 6
Charging the battery (fig. A) 3. Chuck 4. Mode selector / torque adjustment collar The battery needs to be charged before first use and 5. Three-gear selector whenever it fails to produce sufficient power on jobs that 6. Bit holder were easily done before.
Maintenance Set the collar (4) to the lowest torque setting. Tighten the first screw. Your Black & Decker tool has been designed to operate over a If the clutch ratchets before the desired result is long period of time with a minimum of maintenance. achieved, increase the collar setting and continue Continuous satisfactory operation depends upon proper tool tightening the screw.
(Guarantee Card and or store receipt). The EC declaration of conformity period of the Black& Decker Supplimentary Guarantee begins FS146F4/FS188F4/FS244F4 from the original date of purchase not withstanding any Black & Decker declares that these products conform to: subsequent repair or parts replacement.