Table of Contents
Advertisement
ADJUSTING THE BOARD HEIGHT
1.
Pull the top of the board forward several
inches.
2.
To raise the board:
a) Grasp the top of the board frame, pull
the board forward an inch or so, and
lift the frame slightly to unlock the posi-
tioning rod.
b) Push the positioning rod in and slide it
to the back of the slots in the side brack-
ets.
c) Lift the positioning rod to the upper slot
position, then pull the rod forward as
far as the slot allows.
Lift Frame
Pull Board
Out 1 to 2"
Positioning Rod
Upper
Position
Lower
Position
All manuals and user guides at all-guides.com
PRODUCT OPERATION
Board Frame
3.
Rotate the front of the board down to its
ironing position.
ADJUSTING THE SWIVEL TENSION
The ironing board can be rotated 360° by
moving the front to the left or right. The tension
knob under the board may have to be loosened
to obtain a comfortable swivel tension. To
adjust the tension, turn the knob clockwise
(tighten), or counterclockwise (loosen).
THE WORK LIGHT
A work light is activated when the ironing
board is placed in a horizontal position and
the timer is turned on.
Work
Light
3-1
Tension Knob
Advertisement
Table of Contents
