Topcom 301 User Manual page 5

UntitledBook1.book Page 5 Wednesday, November 26, 2008 2:32 PM
• Remove every accessory from the unit.
• Pour the 100ml water into the warming basin
• Put the baby bottle with milk (240 ml) into the warming basin
• Turn the thermostat t
6
• The water will warm up and this will heat the baby bottle.
• After 10 minutes, the milk will be about 40°C.
• Remove the bottle from the warmer and check the milk temperature.
• Disconnect the power after use. Let the device cool down and remove
the water.
• Pour the 50ml water into the warming basin
• Put a baby bottle, teat or pacifier into the warming basin.
• Install the food cup
3
• Turn the thermostat
6
• The heating element will heat the water to a 100°C and creates steam.
• It will need 15 minutes to sterilize the baby bottle, teat or pacifier.
• Disconnect power.
• Remove the food cup
TOPCOM Baby Bottle Warmer 301
.
4
o 70°C.
.
4
upside down on top of the warming basin
to 100°C.
and remove the baby bottle, teat or pacifier.
3
TOPCOM Baby Bottle Warmer 301
.
4
.
4
100ml
30ml
5