Tech Lighting 700BCSIBS-CF Series Installation Instructions page 3

3C
ANCHOR HOLE
ANCHOR HOLE
ANCHOR
4
Line up each anchor with the center of a backplate hole
4
and push the anchor in up to the threads.
Screw the anchors the rest of the way in with a
5
screwdriver.
Secure the backplate to the anchors with the screws and
6
washers provided.
ANCHOR HOLE
ANCHOR HOLE
SCREW
WASHER
6
3
3D
POWER
LINE
WIRES
8
Connect the neutral power line wire to the white fixture
7
wire with a wire nut.
8 Connect the hot power line wire to the black fixture
wire with a wire nut.
9
Connect the fixture to a suitable ground in accordance
with local electrical codes.
3E
Replace the lid onto the center housing and tighten the
10
screws.
7
10
LID