Page 1
Sea Eagle Boats 435ps PaddleSki Motor Mount and Swivel Seat Fishing Rig Page 1 Center Motor Mount (MMCPS) Lay the assembled motor mount board over the yoke bolts, and secure with the threaded knobs (knurled nuts). Run strap through front D-ring and under motor mount board.
Page 2
Motor Mount and Swivel Seat Fishing Rig Page 2 Run strap through front D-ring and under the front bar. Run strap back over front bar and through the D-ring. Keep feeding the strap through the D-ring until strap is tight around the bar. Next, run strap through D-ring behind rod holder bar as shown.
Page 3
Motor Mount and Swivel Seat Fishing Rig Page 3 Run strap back over top of rear bar and front bar and into the buckle. P ull strap tight. Free end can be trimmed down or run through back of buckle and tucked under strap.