Subscribe to Our Youtube Channel
Related Manuals for VOLTCRAFT SPA-5
Summary of Contents for VOLTCRAFT SPA-5
- Page 1 SPA-5 DIRECT VOLTAGE CONVERTER Page 13 – 23 OPERATING INSTRUCTIONS Best.-Nr. / Item No. / N° de commande / Bestnr.: 51 16 70 Version 07/09...
-
Page 2: Introduction
INTRODUCTION Dear Customer, In purchasing this Voltcraft® product, you have made a very good decision for which we would like to thank you. Voltcraft® - In the fi eld of measuring, charging and network technology, this name stands for high-quality products which perform superbly and which are created by experts whose concern is continuous innovation. -
Page 3: Table Of Contents
TABLE OF CONTENTS Page Introduction ..........................13 Table of Contents ........................14 1. Intended Use ........................15 2. Delivery Content ....................... 15 3. Safety Instructions ......................16 4. Operating Elements ......................18 5. Connecting/Starting Up, Discharging/Charging ............... 19 6. Fuses ..........................20 7. -
Page 4: Intended Use
Operating the DC/DC converter outdoors or in damp rooms is not permitted. • The SPA-5 voltage converter must not be modifi ed or rebuilt. This product fulfi ls European and national requirements related to electromagnetic compatibility (EMC). CE conformity has been verifi ed and the relevant statements and documents have been deposited at the manufacturer. -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS We do not assume liability for resulting damages to property or personal injury if the product has been abused in any way or damaged by improper use or failure to observe these operating instructions. The warranty/ guarantee will then expire! The icon with exclamation mark indicates important information in the operating instructions. - Page 6 • Never switch on your DC/DC SPA-5 voltage converter if it has just been moved from a cold to a warm room. Under unfavourable conditions, condensation water can form and destroy your device. Leave the device off/disconnected and wait until it has reached room temperature.
-
Page 7: Operating Elements
OPERATING ELEMENTS Complete converter Cooling gills Power transistors (Caution! Very hot during operation!) Connector cable “+” = red and “-” = black for the 4a input of the DC/DC voltage converter Connector cable “+” = red and “-” = black for the 5a output of the DC/DC voltage converter 6 A fuse (fast-acting 250 V) inside the converter Mounting holes... -
Page 8: Connecting/Starting Up, Discharging/Charging
CONNECTING/STARTING UP, DISCHARGING/CHARGING To connect the battery supply (24 V battery supply (at least two 12-volt batteries, at least 36 Ah) cables with a cross-section of at least 1.0 mm and maximum cable length of 0.5 m are to be used in order to prevent a voltage drop during operation. -
Page 9: Fuses
FUSES Make sure that only fuses of specifi ed type and of the specifi ed nominal current are used for replacement. Using repaired fuses or bridging the fuse bracket is not permitted. To replace fuses, disconnect the converter from the battery circuit on the input and from the connected consumer. -
Page 10: Technical Data
TECHNICAL DATA Input Voltage: 24 V/DC Output voltage: 12 V/DC Output current: Output current (high): Output 72 W Output voltages dependent on load current (of the consumer), at exactly 24 V DC input voltage: Consumer (load) Output voltage max. 14.4 V DC max.
Need help?
Do you have a question about the SPA-5 and is the answer not in the manual?
Questions and answers