Chapter 1: Introduction; Before You Start; Package Checklist - Biostar NF61S MICRO AM2 SE Setup Manual

All manuals and user guides at all-guides.com

CHAPTER 1: INTRODUCTION

1.1 B Y
EFORE OU
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
Prepare a dry and stable work ing environment with
sufficient lighting.
Always disconnect the computer from power outlet
before operation.
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source, humid air and water .
1.2 P C
ACKAGE HECKLIST
FDD Cable X 1
HDD Cable X 1
User's Manual X 1
Fully Setup Driver CD X 1
Rear I/O Panel for ATX Case X 1
Serial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/PDIF Cable X 1 (optional)
Serial ATA Power Switch Cable X 1 (optional)
Printer Port Cable X 1 (optional)
NF61V Micro A M2 SE/NF61S Micro A M2 SE
S
T ART
1