Trouble Shooting - Biostar M7MKE Supplementary Manual

All manuals and user guides at all-guides.com
Chapter 4

4. Trouble shooting

2      (     #   
  !       
 ! 0

Power cable is Visually inspect power
unplugged. cable.
Defective power cable. Visually inspect the cable;
try another cable.
Power supply failure. Power cable and wall
socket are OK, but system
is still dead.
Faulty wall outlet; circuit Plug in device known to
work in socket and test
breaker or fuse blown.
.    " H     #         #  
 " 
 ! 0

Memory DIMM is Turn off computer. Take
partially dislodged from cover off system unit.
the slot on the Check the DIMM to
motherboard. ensure it is securely
seated in the slot.
%)*#
 2!  !0* !2
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
Use different socket,
repair outlet, reset circuit
breaker or replace fuse.
%)*#
 2!  !0* !2
Using even pressure on
both ends of the DIMM,
press down firmly until the
module snaps into place.
,5
Trouble shooting