Lexus CT200H Manual page 96

96
1-3. Theft deterrent system
Intrusion sensor and tilt sensor (if equipped)

The intrusion sensor detects intruders or movement in the vehicle.

The tilt sensor detects changes in vehicle inclination, such as when the
vehicle is towed away.
This system is designed to deter and prevent vehicle theft but does not
guarantee absolute security against all intrusions.

Setting the intrusion sensor and tilt sensor
The intrusion sensor and tilt sensor will be set automatically when the
alarm is set. (P. 93)

Canceling the intrusion sensor and tilt sensor
If you are leaving pets or other moving things inside the vehicle, make
sure to disable the intrusion sensor and tilt sensor before setting the
alarm, as they will respond to movement inside the vehicle.
1
Turn the power switch off.
2
Press the intrusion sensor and
tilt sensor cancel switch.
A message will be shown on
the multi-information display
in the instrument cluster.
The intrusion sensor and tilt
sensor will revert to on each
time the power switch is
turned to ON mode.

Canceling and automatic re-enabling of the intrusion sensor and tilt sensor

The alarm will still be set even when the intrusion sensor and tilt sensor are can-
celed.

After the intrusion sensor and tilt sensor are canceled, pressing the power
switch or unlocking the doors using the entry function or wireless remote con-
trol will re-enable the intrusion sensor and tilt sensor.

The intrusion sensor and tilt sensor will automatically be re-enabled when the
alarm system is deactivated.
CT200h_OM_OM76102E_(EE)