Miditech i2 Control-37 black edition Manual page 7

Pitch Bend Wheel
The Pitch Bend wheel is used for raising or lowering the pitch of a voice during
performance. The range of pitch values depends on the sound generator (sound
card or module) being used. Please refer to the manuals of your devices for
information on how to change the Pitch Bend range. To bend the pitch up, please
move the wheel away from you. To bend the pitch down, please move the wheel
towards you.
Octave knobs
By pressing the Octave key, you will shift the active keyboard range one octave
higher, or lower. For example, if you want to change the octave 2 octaves down,
press Oktave Key twice.
Data Entry slider
The Data Entry slider allows you to adjust the parameters of a MIDI controller. Use
this knob to select different MIDI commands on certain keys from your keyboard.The
i² Control-37 black edition provides several groups of MIDI commands as follows:
MIDI SELECT and function keys
Some keys on the keypad gives you direct access to this MIDI functions: Velocity,
Reverb Depth, Aftertouch, Pan, Volume, Set Ctrl, Reset, Transpose single note
up and down, MIDI channel, CC data, CC number, Program number. To use this
functions, simply press the MIDI Select button and then the function you want to
use. For example: Press the MIDI SELECT button, then the VOLUME KEY, and you
can adjust directly the volume of the keyboard with the DATA ENTRY slider. Another
example: With the # and b keys you can increase or decrease the notes by
halftones. If you want to transpose by 3 semitones: Press the MIDI SELECT, then
the # key, and use the DATA ENTRY knob (in the display you see 3 for three
semitones) then press the MIDI SELECT knob again to finish the change.
Reset key
Pressing the MIDI SELECT button and the RESET key will send out a message to
return all external MIDI instruments to their default setting as well.
7