TABLE OF CONTENTS SAFETY PRECAUTIONS .....3 - Precautions In Installing the Product ....3 - Precautions to the AC Adapter and Electrical Power................. 5 - Precautions In Moving the Product ....7 - Precautions In Using the Product ...... 8 - Mounting on a Wall ...........
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
Page 4
If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station).
- If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock.
Page 6
• If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •...
Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •...
• Keep the proper distance from the product. - Your vision may be impaired if you look at the product too closely. • Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image retention. - Image retention and related problems are not covered by the warranty on this product.
ASSEMBLING AND PREPARING CAUTION • Always use genuine components to ensure safety and product performance. - The product warranty will not cover damage or injury caused by the use of counterfeit components. • Connect the power cord to the product before you plug it into a wall outlet. - Plugging the power cord into a wall outlet first may cause an electric shock, which can damage the product.
WARNING • The warranty will not cover any component damage caused by electrostatic discharge at the time of installation. When installing this product, you must wear anti-electrostatic discharge (ESD) gear. • There should be no oil, water, dust and foreign substance on the glass surface where the coloured, transparent LED film will be installed.
Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and optional accessories. LCLG002 ACC-LATP1 NOTE •...
TROUBLESHOOTING No image is displayed or the screen image looks abnormal. Problem Solution Is the power cord connected to the • Check if the power cord is correctly plugged into the power outlet. product? Check if the cable is properly connected. •...
PRODUCT SPECIFICATIONS Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product. symbol means alternating current, and the symbol means direct current. Film Panel Screen Type Film Panel Usage Condition Daily Usage Time 24 hours (video)
Page 18
LAT240DT1*, LAT240DT2*, LAT240DT3* Film Panel Pixel pitch 24 mm (H) x 24 mm (V) Power Power LAT240DT1* On Mode: 37 W (Typ.) Consumption LAT240DT2* LAT240DT3* On Mode: 9 W (Typ.) LAT240DT1* Film 668 x 480 x 1.8 (mm) / 0.73 (kg) Dimensions (Width x Height x Depth) Module 672 x 480 x 1.8 (mm) / 0.73 (kg)
Page 21
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Temporary noise is normal when powering ON or OFF this MODEL device.