Cleaning Under Running Water - Silvercrest SRR 3.7 D5 Operating Instructions Manual

Cleaning under running water

The cutting unit 2 is suitable for cleaning under running
water.
1) Pull the cutting unit 2 off the handset.
2) Hold the cutting unit 2 under the running water so that the
water fl ows through the shaving heads 3 from the inside to the
outside.
CAUTION! MATERIAL DAMAGE!
Ensure that only the shaver unit 2 is under the stream of water!
►
The shaver handset is only protected against water splashes and
can be irreparably damaged if it is held under running water.
3) Allow the cutting unit 2 to dry out completely before using the
shaver again.
│ GB │ IE │ NI
■ 16
SRR 3.7 D5