Advertisement
Quick Links
TOOLPRO
18V Multi- Function Tool
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Oscillation Tool
These instructions contain important information that will help you get the best from your
Oscillation Tool, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 1300889028
After Sales Support
FREE CALL 1300 889 028
EMAIL:salesau@positecgroup.com
CMT18WD.9
Advertisement
Related Manuals for ToolPRO CMT18WD.9
Summary of Contents for ToolPRO CMT18WD.9
- Page 1 TOOLPRO 18V Multi- Function Tool CMT18WD.9 Instruction Manual After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before operating or maintaining your Oscillation Tool These instructions contain important information that will help you get the best from your Oscillation Tool, ensuring it remains safe to operate.
-
Page 2: Table Of Contents
Contents Safety Information....................03 In The Box........................08 Accessories......................08 Operating Instructions..................... 09 Working hints for your Sander................14 Maintenance......................14 Technical Data......................15 Customer Helpline 1300 889 028... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Indoor use only Batteries may enter water cycle if disposed improperly, which can be hazardous for ecosystem. - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
- Page 6 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
- Page 7 Safety Information Important - Please read these instructions fully before starting assembly General Safety Warnings and away from inflammable materials. Batteries can get hot during charging. Do not overcharge any batteries. Ensure that batteries and chargers are not left unsupervised during charging.
-
Page 8: In The Box
In The Box Parts Tool-less accessory clamping lever Variable speed control On/Off switch Venting slot Battery pack release button * LED light Battery pack * Flange Accessories 1-1/8’’ 28mm standard end cut blade 1-3/8’’ 35mm standard end cut blade Rigid scraping blade Sanding pad Sanding sheet (60#/80#/120#) Customer Helpline 1300 889 028... -
Page 9: Operating Instructions
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. BEFORE PUTTING INTO OPERATION Charging the battery NOTE: a) Do not use any charger other than that specifically provided for use with the equipment. - Page 10 Operating Instructions Charging indicator This charger is designed to detect some problems that can arise with battery packs. Indicator lights indicate problems (see table below). If this occurs, insert a new battery pack to determine if the charger is OK. If the new battery charges correctly, then the original pack is defective and should be returned to a service center or recycling service center.
- Page 11 Operating Instructions Red light Green light Charging indicator This charger is designed to detect some problems that can arise with battery packs. Indicator lights indicate problems (see table below). If this occurs, insert a new battery pack to determine if the charger is OK. If the new battery charges correctly, then the original pack is defective and should be returned to a service center or recycling service center.
- Page 12 Operating Instructions 3) When charging is completed, the light will turn to green. The pack is now fully charged, unplug the charger and remove the battery pack. WARNING: When battery charge runs out after continuous use or exposure to direct sunlight or heat, allow time for the battery to cool down before re- charging to achieve the full charge.
- Page 13 Operating Instructions OPERATION Intended Use The power tool is intended for sawing and separating wooden materials, plastic, plaster, non-ferrous metals and fasteners (e.g. nails and clamps) as well as for working on soft wall tiles and for dry grinding of small surfaces. It is especially suitable for working close to edges and for flush cutting.
- Page 14 Operating Instructions 2. MOUNTING/CHANGING THE SANDING SHEET (See Fig. D) Align the sanding sheet and press it onto the sanding pad by hand. Firmly press the power tool with the sanding sheet against a flat surface and briefly switch the power tool on. This provides for good adhesion and prevents premature wear.
- Page 15 Operating Instructions 4. USING THE VARIABLE SPEED CONTROL (See Fig. F) Select oscillation frequency (speed) while the motor is running. The variable speed control can be used to set the optimum oscillating frequency according to the accessories used and the respective application. High oscillation frequency: Sanding, sawing, rasping and polishing stone and metal.
-
Page 16: Maintenance
Working Hints For Your Tool If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always keep the blade sharp. Always ensure the workpiece is firmly held or clamped to prevent movement. -
Page 17: Technical Data
Technical Data Technical Data Table Voltage 18 V No load speed 5000-20000/min 3.0° Oscillations angle Machine weight 0.84kg 1.5Ah battery 2.0Ah battery 4.0Ah battery 400mA charger 3-5hrs 5-7hrs 10-12hrs (HYCH0102000400S) Charging 1.5A Charger time 60min 80min 160min (ACG18LD) 3.0A Charger 40min 60min 120min...
Need help?
Do you have a question about the CMT18WD.9 and is the answer not in the manual?
Questions and answers