Related Manuals for logika WL-ZCSWNPW-S1322-02
Summary of Contents for logika WL-ZCSWNPW-S1322-02
- Page 1 Smart Wall Switch (1, 2 and 3 Gang) WL-ZCSWNPW-S1322-02,WL-ZCSWNPW-S1335-02, WL-ZCSWNPW-S1312-02 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Device Layout
Device Layout This manual will use the 3 gang version of the switch as an example throughout. Touch Button Light Status Indicator System Indicator Screw Holes Multi-Function Button Cover Main Body... -
Page 4: Specifications
Features • Communication Mode: IEEE 802.15.4 Zigbee. • Switch state stays in sync with smart system. • Can be linked to other smart devices, such as the Smart PIR Motion Sensor, to allow motion controlled lighting. • Supports timed setting and remote access via the mobile application. •... -
Page 5: Installation Steps
Installation Steps Hardware Installation Installation of the Smart Wall Switch is the same as that of a traditional switch. The switch is also designed to fit a standard NZ back box. Obviously, make sure you have turned off the mains power prior to install. - Page 6 Adding the Device to the Smart Home Network Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the Logika Smart Mobile App user guide which will take you through the process of adding smart devices to the system.
-
Page 7: Device Functions
Device Functions When the device is first powered on, it will normally automatically attempt to connect to the Zigbee Smart Home network. The System Indicator light will flash as it’s searching for the network. If it connects, the light will remain on for 2 seconds and then go out. If this does not happen, you can manually connect via the mobile app and follow the instructions below. -
Page 8: Safety Precautions
Safety Precautions • Disable any power prior to connecting the device to the main supply. • The device must be installed by a qualified electrician. • Do not disassemble or refit this product or its accessories. • The device should be mounted in a dry environment. It is not designed to be used outdoors. -
Page 9: Troubleshooting
You should now be free to add the device to the local smart network. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!