Page 1
OWNER’S MANUAL GUIDE DU PROPRIETAIRE Model / Modde UV610 7.2 Volt DC Cordless Sweeper Balai Motoris Sans Fil For information or assistance: Pour plus d’information ou pour obtenir de I’assistance : EURO-PRO Corporation Bois Franc 4400 Ville St. Laurent, QC H4S Tel.: l-800-361 -4639 www.sharkhomecare.com...
IMPORTANT SAFEGUARDS When using an electrical appliance, basic safety precautions should always be observed, including the following READ ALL INSTRUCTIONS BEFORE USING YOUR CORDLESS SWEEPER. W A R N I N G . To reduce the risk of fire, electrical shock, or injury: Do not charge this unit outdoors.
CORDLESS SWEEPER Model UV610 7.2 Volt DC 1. Sweeper Power Head Edging Tool Charging Jack 2. On I Off Switch Lower Handle 3. Charging Light Indicator Metal Extension Handles 4. Dust Cup (Container) Upper Handle 5. Rotating Brush Charging Adapter 6.
ASSEMBLING YOUR CORDLESS SWEEPER Before you start: Your Cordless Sweeper will require very little assembly. You should remove it from the carton and familiarize yourself with all the components listed per the exploded view drawing (pg.2) This will help you in the assembly and operation of your cordless sweeper I.
Page 5
HOW TO OPERATE YOUR CORDLESS SWEEPER 1. Before using, please ensure that the cordless sweeper has been initially charged for 16-20 hours Your cordless sweeper will only operate properly when the batteries are fully charged. When fully charged your sweeper will operate for 35-45 minutes - dependent upon the type of use (example - carpets or bare floors).
CLEANING THE DUST CONTAINER To achieve the best performance, empty the dust container after each use. I, Pull the dust container straight out from the side. (Fig. 6) Figure 6 2. Empty dust container contents. (Fig. 7) If desired- you may rinse with water to ly before replacing on the sweeper.
Page 7
CHARGING THE CORDLESS SWEEPER Connect the charger plug to the charging jack or hole on the back of the sweeper. Plug the the charging adapter into the wall outlet. (120V-,60Hz.) Use only TechWorld Charger AD-092~UL, rated output DC9V,200mA. (Fig. 9) This cordless sweeper is powered by Ni-Cd batteries.
BATTERY REMOVAL & DISPOSAL NOTE : If uncertain as to how to remove your battery pack, we suggest you take your vacuum cleaner to a reputable small appliance service technician to have this service performed. Follow these steps when battery removal is required. This vacuum cleaner is equipped with Ni-Cd batteries and you need to dispose of them properly.
TROUBLESHOOTING GUIDE POSSIBLE REASON POSSIBLE SOLUTION PROBLEM 1. Batteries discharged. Charge unit. No power in electrical Check fuse or breaker. SWEEPER WILL NOT outlet supplying Replace fuse/reset breaker OPERATE transformer. Call I-600-361 -4639. Unit needs servicing. SWEEPER WILL NOT Dust container is full. Empty dust container - PICK-UP OR 2.
ONE (1) YEAR LIMITED WARRANTY EURO-PRO CORPORATION warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to EURO-PRO Corporation, 4400 Bois Franc, Ville St.
Need help?
Do you have a question about the EURO-PRO UV610 and is the answer not in the manual?
Questions and answers