Vax Bare Floor Pro S2S Series User Manual page 7

S2S Series User Guide v1.0_8.0_User guide 23/03/2012 16:25 Page 6
---
Operation
Steam cleaning hard floors
WARNING: Never leave the stick steam cleaner in one spot on any surface for an extended period of time with
!
a damp or wet pad attached as this may damage the floor surface. Your stick steam cleaner should only be
used on tiles, lino and sealed wood flooring including sealed laminate.
! WARNING: Do not operate/use stick steam cleaner without water in clean water tank.
! IMPORTANT: To reduce the risk of personal injury, unplug the steamer when assembling the accessories.
2 1
Plug into mains and turn
on. Press power button in
and the blue power
indicator light will
illuminate. Within approx 1
min of the unit being turned
on, the green steam ready
indicator will illuminate
when ready for use.
NOTE: When the green light is off water is heating to max temperature.
!
NOTE: For 1 x 500ml water tank = 15 minutes steaming time (approx.).
Add detergent if required
Blue light = unit on
Green light = steamer ready to use
No green light = water heating to max temperature (NOTE: You can still use your steamer at this time)
If during use the green light switches off this means the steamer is heating up to maximum temperature.
The green light will re-appear when it has heated back up to maximum temperature.
6
All manuals and user guides at all-guides.com
To recline the unit place
foot on floor head and tilt
handle backwards.
To produce steam
squeeze the trigger in
short bursts. To prevent
overly wetting floors, do
not hold down
contiuously.
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308