Korg Pandora Stomp Owner's Manual page 10

7. OUTPUT jack: Connect your guitar amp, bass amp, or mixer, etc. to this jack.
When an amp is connected, it is better for the sound if the Cabinet Effect Through
function is turned on (see p.25).
8. LCD screen: Please refer to "LCD screen" on page 11.
9. USB port: You can connect your computer to this port using a USB cable so that
you will be able to edit PANDORA stomp programs in the Editor software that's
installed on your computer. When you connect the unit to a computer using a
USB cable, USB bus power is supplied from the computer.
Some computers may be unable to supply USB bus power. In such cases, use
a battery, AC adapter (sold separately) or a self‐powered hub (that can
receive power from an external power supply).
10. Program Memory buttons (A, B, C and D buttons): Please refer to page 13.
11. Power switch: Set this switch to STANDBY to power off, or set it to ON or to
USB to power the unit on.
12. Foot switch: You can use the foot switch to perform operations such as turning
effects on or off, activating/deactivating the tuner and selecting a program (see p.25).
13. INPUT jack: Connect your guitar (or bass) to this jack.
14. Value dial: In Play mode, use this dial to select a program. In other modes, use
this dial to edit parameters or configure various settings.
10