Advertisement
https://www.supplychimp.com
Digital Steel Fire & Security Safe
PACKAGE CONTENTS
1 – Digital Steel Fire & Security Safe
1 – Operation Manual
4 – "AA" Batteries
2 – Entry Keys
1 – Emergency Access Key
1 – Silica Gel Pack
1 – Removable Drawer Tray
PRODUCT OVERVIEW
Model 2208
DO NOT RETURN SAFE TO STORE!
If there are any missing parts or you have
difficulty setting up or operating your safe,
please contact our Consumer Assistance
Department by telephone:
1-877-354-5457 (USA & Canada)
Monday–Friday 7am - 5pm PST
A - Safe Body
B - Safe Door
C - Entry Handle
D - Keyhole
E - Digital Keypad
F - Battery Cover
G - Door Hinges
H - Steel Casters
SETUP & OPERATION
STEP 1: INSTALL BATTERIES
For your convenience, we have included 4 "AA" Batteries that provide the power
for the electronic controls. These must be installed before using your safe.
1. The battery compartment is located
behind the dark gray panel under the
keypad. To gain access, slide the
panel to the left and lift off.
2. Install the 4 "AA" batteries in the battery
compartment as illustrated on the
inside of the compartment.
3. Re-install battery compartment cover.
TO REPLACE BATTERIES:
For best results, it is recommended to replace the batteries when they
become weak as shown on the Battery Power Level Indicator or at least once
a year. NOTE: It is NOT RECOMMENDED to use Non-alkaline or
rechargeable batteries.
IMPORTANT: If the batteries are fully discharged, the digital keypad will not
function and the batteries will need to be replaced in order to gain access to
the safe.
If the batteries are removed or fail, the keypad memory will NOT be erased
and the active programmed code will still work once power has been
restored.
1.
2.
Advertisement
