Download Print this page

Care And Maintenance - Sharper Image 206565 User Manual

Total hand compression massager

Advertisement

TURNING IT ON
With one hand in the chamber, use your other hand to press the ON/OFF/HEAT button.
The LEDs on the Control Panel will flash.
Note: In Default Mode, the Massage Mode is on Mode-A, Heat is on low and the TIMER is set for 5
minutes.
MASSAGE MODE
When you turn the unit on, the default mode is on Mode-A. Press the MODE switch to cycle
through the massage modes (A: low, B: medium and C: high).
OPTIONAL HEAT FUNCTION
Activate the Heat function for gentle warmth. There are two different heat levels (High and Low).
Select your preferred level by pressing the Heat button.
Press once for Low. Press twice for High.
TEMPERATURE SETTINGS
RUN TIME
5 mins
10 mins
15 mins
TIMER
When the unit is operating, press the TIMER button to set the automatic shutoff timer. There are
3 different timer settings: 5 minutes, 10 minutes and 15 minutes. The unit will shut off when it
reaches the desired time interval. At that time, you can easily remove your hand.
TURNING IT OFF
To turn the unit off before the time on the automatic timer expires, press and hold the ON/OFF
button. The unit will turn off and you can easily remove your hand.
QUICK RELEASE
The red QUICK RELEASE button on the left side of the product is an emergency air release. Use
it to release your hand quickly in an emergency, or any time the pressure exceeds your comfort
level.

CARE AND MAINTENANCE

• Store the Total Hand Compression Massager in a cool, dry place when not in use
• After unplugging, wipe with a soft, damp cloth using no abrasive cleaners
• Do not place the unit into any type of liquid
• Keep away from all solvents and harsh detergents
• DO NOT attempt to repair this Total Hand Compression Massager. There are no user-
serviceable parts
LOW TEMPERATURE
111.2° F
117.5° F
122.4° F
- 3 -
HIGH TEMPERATURE
114° F
123.26° F
129.6° F

Advertisement

loading