Advertisement
Quick Links
2. Navigate to the
C:\Actel_M1AGL\Sample Design\PC_Software\TrafficLight
Folder and double click on the Traffic_Light.exe file.
Choose the connected COM port found in the previous step.
Click Run.
Observe the interaction with the M1AGL Development Board LEDs by
moving the Speed slide switch on the GUI.
For additional information, please refer to the
Cortex-M1 Enabled IGLOO
Development Kit User's Guide
For support please contact SoC Solutions at
support@socsolutions.com
.
For information on additional products for the Cortex-M1 Enabled
IGLOO Development Kit, please contact
Copyright 2008 ©. All rights reserved. All logos and trademarks are property of the respective
companies.
sales@socsolutions.com
.
Cortex-M1 Enabled IGLOO
Development Kit
Quick Start Guide
1Mbyte
USB Connector
(FlashPro3
Programmer)
USB / Serial
Connector
LEDs
Switches
In the box...
•
M1AGL Development Board
•
Cortex-M1 Enabled IGLOO
Development Kit Install CD
•
Libero IDE (DVD)
•
2 USB Cables
•
1 External 5-Volt Power Supply
M1AGL-DEV-KIT-SCS
16Mbyte
M1AGL with
SRAM
Flash
Cortex-M1 processor
Version 1.5, February 2008
Flash*Freeze
Switch
Advertisement
Related Manuals for Actel SoC Solutions Series
Summary of Contents for Actel SoC Solutions Series
- Page 1 2. Navigate to the C:\Actel_M1AGL\Sample Design\PC_Software\TrafficLight Folder and double click on the Traffic_Light.exe file. Cortex-M1 Enabled IGLOO M1AGL-DEV-KIT-SCS Development Kit Quick Start Guide 1Mbyte 16Mbyte M1AGL with SRAM Flash Cortex-M1 processor USB Connector (FlashPro3 Programmer) Choose the connected COM port found in the previous step. USB / Serial Click Run.
- Page 2 SoftConsole tools, please refer to the documentation supplied in the Libero IDE DVD case or go to the Actel website. Next, plug in the second USB cable, between the PC and the J2 USB (SERIAL) connector on the M1AGL board.