Toolshop 241-9894 Operator's Manual

4.0 amp 18 gauge metal shears

Advertisement

Quick Links

241-9894
4.0 AMP 18 GAUGE METAL SHEARS
Operator's Manual
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures and warranty.
Put it and the original sales receipt in a safe dry place for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 241-9894 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toolshop 241-9894

  • Page 1 241-9894 4.0 AMP 18 GAUGE METAL SHEARS Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING : When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. 2.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS 15. USE EYE PROTECTION. Use a full-face mask if the work you’re doing produces metal filings, dust or wood chips. Goggles are acceptable in other situations. Wear a clean dust mask if the work involves creating a lot of fine or coarse dust.
  • Page 4: Functional Description

    SAFETY PRECAUTIONS FOR METAL SHEARS pacemakers should: • Avoid operating alone. • Do not use with trigger locked on. • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
  • Page 5: Maintenance

    SWIVELING THE CUTTER HEAD WARNING: TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and unplug the tool from its electrical outlet before adjusting tool or installing accessories. Put on heavy-duty work gloves and ANSI-approved safety goggles to avoid injury.
  • Page 6 BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. AFTER USE, wipe external surfaces of the tool with a clean cloth. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
  • Page 7: Troubleshooting

    TROUBLESHOOTING Problem Possible Causes Likely Solutions Tool will not start. Cord not connected. Check that cord is plugged in. No power at outlet. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
  • Page 8 PARTS LIST AND SCHEMATIC DRAWING ITEN# DESCRIPTION ITEN# DESCRIPTION...
  • Page 9 PARTS LIST AND SCHEMATIC DRAWING WARNING: Repairs should be made by an authorized repair center. Do not open or disassemble this power tool. Contact at 1-866-915-8626 for questions regarding this power tool.
  • Page 10 TOOL SHOP® 4.0 AMP 18 GAUGE METAL SHEARS WARRANTY 1-YEAR LIMITED WARRANTY: This brand power tool carries a 1-Year Limited Warranty to the TOOL SHOP® original purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this tool with your original sales receipt back to your nearest retail store.

Table of Contents