Advertisement
MA4200
Connecting L / R Stereo Speakers
1.
Plug the external speaker's audio cable to the 6.3mm or 4P PHOENIX jacks on the rear panel.
The speaker's impedance must be 4Ω or more. When using 4P PHOENIX for connection, please accord with
the positive (+) and negative (-) polarities.
IMPORTANT – Either 6.3mm or 4P PHOENIX jacks can be connected.
2.
Turn on the power and then adjust L/R volume control on the front panel to a desired level.
3.
There is a BALANCE control for balancing the output volume from the RIGHT and LEFT speakers when either
speaker is too loud or too low.
4.
Bass and treble tone levels can be adjusted on the front panel.
PAGE 8
OPERATION MANUAL V1.0
Advertisement
