Cleaning And Maintenance - Omnitronic WAMS-10BT Series User Manual

10

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the PA system. Please use a soft lint-free and moistened cloth. Never
use alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
Replacing the Fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Loudspeakers
If the speaker system distorts, one of the loudspeakers may be defective. In this case the PA system should
not be operated any more in order to prevent further damage. Please contact your dealer.
If clacking sounds are heard from the speaker system, screws may have loosened due to the continuous
vibrations. The speaker system should be checked by a specialist.
Storage and Maintenance of the Rechargeable Batteries
When the device is not in use for a longer period of time, the rechargeable batteries have to be charged
every month. Otherwise danger of permanent power loss or battery damage. Remove the batteries from the
housing if the temperature is below -5° C! Otherwise danger of battery damage. Always store rechargeable
batteries in a warm enough, dry place where children cannot access.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
42