Advanced Menu; Platform Misc Configuration - Asus DN-300-R2 Manual

Industrial motherboard
Table of Contents

Advertisement

3.
From the Confirm New Password box, key in your password again to
confirm the password, then click OK.
To change a Boot Menu password:
Select the Boot Menu Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then
2.
press <Enter>.
From the Create New Password box, key in a new password, then press
3.
<Enter>.
From the Confirm New Password box, key in your password again to
4.
confirm the password, then click OK.
To clear the Boot Menu password, follow the same steps as in changing a Boot
Menu password, but click OK when prompted to create/confirm the password.
After you clear the password, the Boot Menu Password item on top of the screen
shows Not Installed.
Clear password jumper support [Enabled]
When this item is set to [Enabled], and the clear password jumper is set to clear
password pins, the BIOS password will be cleared at the next boot when entering
BIOS setup by pressing <F2>. Configuration options: [Disabled] [Enabled]
Chassis Intrusion [Disabled]
This item allows you to enable or disable the chassis intrusion detection function.
Connect one end of the chassis intrusion sensor or switch cable to the chassis
instrusion connector. The chassis intrusion sensor or switch cable sends high-
-level signal to the connector when a chassis component is removed or replaced.
The signal is then generated as a chassis intrusion event. Configuration options:
[Disabled] [Enabled]
TPM clear on intrusion [Disabled]
When this item is set to [Enabled], an intrusion event must clear the active TPM
without requiring any user confirmation. Configuration options: [Disabled] [Enabled]
3.3

Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other
system devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect
field values can cause the system to malfunction.
3.3.1

Platform Misc Configuration

The items in this menu allow you to configure the platform-related features.
3-4
DN-300-R2

Advertisement

Table of Contents
loading

Table of Contents