Boot Menu - Asus DN-300-R2 Manual

Industrial motherboard
Table of Contents

Advertisement

3.5

Boot menu

The Boot menu items allow you to change the system boot options.
Boot Configuration
Boot Logo Display [Disabled]
[Auto]
Adjusts logo automatically based on Windows
requirements.
[Full Screen]
Maximize the boot logo size.
[Disabled]
Hide the logo during POST.
POST Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Auto] and [Full
Screen] This item allows you to select the desired additional POST waiting
time to easily enter the BIOS setup. You can only execute the POST delay
time during Normal Boot. The values range from 0 to 10 seconds.
This feature will only work under normal boot.
POST Report Delay Time [3 sec]
This item appears only when you set Boot Logo Display to [Disabled]. This
item allows you to select a desired post report waiting time. Configuration
options: [1 sec] ~ [10 sec] [Until Press ESC].
Bootup NumLock State [On]
This item allows you to enable or disable power-on state of the NumLock.
Configuration options: [On] [Off]
POST Warnings [Just Warning]
Configuration options: [Just Warning] [Warning and Stop Booting]
AMI Native NVMe Driver Support [Enabled]
Configuration options: [Disabled] [Enabled]
F10 Boot Menu [Enabled]
Configuration options: [Disabled] [Enabled]
USB Boot [Enabled]
Configuration options: [Disabled] [Enabled]
Watch Dog [Disabled]
Enables/disables the watchdog feature. Configuration options: [Disabled] [Enabled]
POST End Beep [Enabled]
When this item is enabled, there will be a short beep at the end of the POST
phase. Configuration options: [Disabled] [Enabled]
Chapter 3: BIOS setup
display
®
3-15

Advertisement

Table of Contents
loading

Table of Contents