Response To Dangers And Accidents; Signs - Elektron MULTISPOT MTC-6000 Operating Manual

Response to dangers and accidents

2.5
Preventive measures
Always be prepared for accidents or fires!
Have first aid facilities (first aid box, blankets etc.) and fire extinguishers accessible at all
times.
Familiarise the personnel with accident reporting, first aid and rescue procedures.
Keep the access routes free for the rescue services.
If the worst comes to the worst: Act correctly
Immediately switch off the equipment at the emergency stop button.
Initiate first aid measures.
Remove persons from the danger zone.
Inform the responsible person at the place of work.
Call a doctor and/or the fire brigade.
Clear the access routes for the rescue services.

Signs

2.6
The following symbols and signs can be found in the working area. They related to the imme-
diately surrounding area in which they are posted.
WARNING!
Danger from uncontrolled restarting!
Uncontrolled restarting can lead to serious personal injury or even death!
Therefore:
Before switching on again, ensure that the cause of the emergency
−
stop has been remedied and that all safety devices have been fitted
again and are fully functional.
Only unlock the emergency stop palm button when there is no longer a
−
danger.
WARNING!
Risk of injury due to illegible symbols!
Over the course of time, labels and symbols on the equipment may become
soiled or otherwise made illegible.
Therefore:
Keep all safety, warning and operating instructions on the equipment
−
in a clean and legible condition at all times.
Immediately replace any damaged signs or labels.
−
Observe the operating manual
Use the equipment marked with this symbol only when you have read the
operating manual.
Moving machine parts
Maintenance work on open machines may only be carried out by specially
qualified personnel. There is a risk of injury as long as the machine is mov-
ing.
Electricity
Only qualified electricians may be allowed to work in rooms marked with this
symbol.
Unauthorised persons must not enter the marked places of work or open the
marked cabinet.
MTC 6000
Safety
11