Technical Specifications - Skil 510 Instructions Manual

SKIL_IB510v2 22-09-2006
GB
Automatic leveling laser
INTRODUCTION
This tool is intended for the defining and checking of
exact horizontal, vertical and crossed lines by projecting
self-leveling laser beams
Carefully read this instruction manual as well as the
warning label on the tool, before you use the tool 1
Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious (eye) injury
Save this instruction manual for future reference

TECHNICAL SPECIFICATIONS

Laser type
Laser class
Power output
Power supply
Operating temperature
Storage temperature
Self-leveling range
Weight
Accuracy
SAFETY
Do not look into the laser beam (laser radiation) 2
Do not point the laser beam at persons or animals
Do not place the tool in a position that may cause
anyone to look into the laser beam intentionally or
unintentionally
Do not use any magnifying optical tools (such as
magnifying glasses, telescopes, or binoculars) to view
the laser beam
Do not remove or damage the warning label on the tool
Do not operate the tool in the presence of flammable
liquids, gases or dust
Do not operate the tool with children around
This tool should not be used by people under the age of
16 years
Do not use the tool for any purpose other than those
mentioned in this instruction manual
Only use the original accessories which are intended for
this tool
TOOL ELEMENTS 3 $
A On/off button for projecting horizontal lines
B On/off button for projecting vertical lines
C Switch for locking self-leveling system
D Battery compartment cover
E Adjustment knobs
F Bubble levels
G Graduation scale
H Laser light opening
J Warning label
K Locking ring (tripod)
L Locking clips (tripod)
M Tripod rod
10:09 Pagina 7
510
650 nm
2
< 1 mW
2 x AA (LR6) / 1,5V battery
-10°C to 55°C
-20°C to 60°C
≤ ± 4°
0,68 kg
+/- 1 mm/m
N Adjustment handle (tripod)
P Locking knob (tripod)
Q Extension rod (tripod)
USE
Mounting of batteries 4
- open cover D
- insert 2 x AA (LR6) / 1,5V batteries (pay attention to
correct polarisation)
- close cover D and ensure it is in place securely
- always remove the batteries from the tool, if the tool
is not used for a long period
- always replace the complete set of batteries
On/off 5
- switch on/off the tool by pressing button A or button B
! do not look into the laser beam
! do not point the laser beam at persons or animals
! always switch off the tool after use
! always lock the self-leveling system after use and
during transportation by sliding switch C in the
lock-position
Operating the tool 6
- position the tool on a horizontal surface
- switch on the tool
! if the surface inclines more than 4°, the tool is out
of its self-leveling range
- level the tool by turning adjustment knobs E in such a
way that the bubbles in levels F are centered
- only use the bubble levels as a first rough indication
for leveling
! before projecting a line shake the tool somewhat
in order to activate the self-leveling system
- project a horizontal line by pressing button A
- project a vertical line by pressing button B
- project a crossed line by pressing button A and B one
after the other
- obstructions in front of the tool will not affect the line
projection 7
- use the tool manually for quick reference of a straight
line or alignment of two points of reference (lock the
self-leveling system) 8
- make measurements using the projected line as
reference 9
Aligning objects horizontally on adjacent walls 0
- rotate tool manually for easy projection of horizontal
lines across a room
- use graduation scale G 3 for making accurate
alignments across a room
Aligning objects vertically on adjacent surfaces !
- rotate tool manually for easy projection of vertical
lines across a room
- use graduation scale G 3 for making accurate
alignments across a room
Aligning objects using the crossed line projection @
Laser viewing glasses #
- for improving the view of the laser line
! these glasses will not protect your eyes against
laser radiation
Tripod $
- unfold the tripod
- lock the tripod with ring K
7