How to Replace the PF Kit (1850/1870N)
Step 5
1. Move the white tab downward until it
stops as shown by the arrow in Figure
5. Then slide the locking piece towards
the right and remove it from the
machine. See Figure 5.
2. Move the paper pick-up roller towards
the right and lift it out of the machine.
Please note: The paper pick-up roller
assembly consists of one roller, two roller
collars, two springs and two teflon
washers. See Figure 6.
Step 6
1. Remove two white roller collars,
two springs and two teflon
washers from either side of the
paper pick-up roller. These parts
will be re-used.
Step 7
1. Install the springs, teflon
washers and white roller collars
on the new paper pick-up roller.
See Figures 7 and 8.
Please see note on the next page.
Figure 5.
Figure 6.
Figure 7.
Figure 8.