Advertisement
STEAM HOSE
Carnes steam hose is made from EPDM compound to
withstand the low pressure steam without deterioration.
Model HXSAB steam hose has an I. D. of 7/8" for use
with units that use "AX" or "B" steam cylinders. Model
HXSAC has an I. D. of 1-5/8" for use with units that use
"C" cylinders. The hose may be easily cut to the exact
length at time of installation.
STEAM HOSE DRAIN "T" FITTINGS
Steam hose drain "T" are available for use when the duct
is located below the top of the humidifier or where the
length of steam hose is in excess of 12 feet.
Humidifier Model
Drain "T" Model
HBA, HCA
HXTABB
HBD, HCD
HBG, HCG
HXTACB
HBH, HCH
www.carnes.com
CONDENSATE RETURN LINE
Two models of condensate return line are available.
Model HXRA has an I. D. of 3/8" and is used whenever
steam distributor pipes are used with the humidifier.
Model HXLA has an I. D. of 5/8" and is used with optional
fan distribution units.
"T" FITTINGS
In some applications it may be desirable to have the
steam generator cylinder feed two steam distributor
pipes. "T" fittings can be installed in the steam hose and
condensate return line.
Dimensions
STEAM HOSE "T" FITTINGS
7/8"x7/8"x3/8"
Humidifier Model
HBA, HCA
1-5/8"x1-5/8"x3/8"
HBD, HCD
HBG, HCG
HBH, HCH
CONDENSATE HOSE "T" FITTINGS
Humidifier Model
Humidifiers | Accessories
Drain "T" Model
HXTABA
HXTACA
Drain "T" Model
ALL
HXTAD
Dimensions
7/8"x7/8"x7/8"
1-5/8"x1-5/8"x1-5/8"
Dimensions
3/8"x3/8"x3/8"
G-23
Advertisement
