Table of Contents
Advertisement
Operating Instructions for the Semak Coffee Pot Warmer
The Semak Coffee Pot Warmer is designed to keep large quantities of dripolated /
percolated coffee warm over a period of hours.
1.
Before connecting to electrical outlet, clean body and surface of the Coffee Pot
Warmer to remove any residues from the manufacturing process.
2.
Ensure that both of the Coffee Pot Warmers' switches are in the OFF position
and that the power supply is also switched off before connecting to the
electrical outlet.
3.
Connect the unit to electricity and turn on the desired warmer (left/right/both)
by flicking the appropriate switch on the front body of the unit. This will turn
the heating elements on.
4.
Give the unit 10 minutes to reach temperature and then place the coffee pot
(from a coffee percolator/dripolator) on the heated element to maintain
temperature. Do not touch the element at any point.
5.
The Coffee Pot will remain heated until the unit is switched off.
6.
When completed, turn the power switches at the front of the unit off, followed
by turning off the wall power switch and removing the plug.
7.
Once pot has cooled, it may be removed from the unit and cleaned.
8.
When the heating elements (circular plates on the top of the unit) have cooled,
store the unit away until next use.
Page | 6
Advertisement
Table of Contents
