Table of Contents General Safety Instructions for All Semak Products ............. 4 Safety Instructions ......................5 Operating Instructions for the Semak Pie Warmer ............6 Cleaning Instructions for the Semak Pie Warmer ............7 Spare Parts for the Semak Pie Warmer ................ 7 Service &...
Page 3
RETAIN THESE SAFETY INSTRUCTIONS Page | 3...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in anyway. Return to Semak or an authorised service agent for repair. CAUTION Hot Surfaces. NEVER leave the appliance ON unattended. ALWAYS unplug the cooker after use.
Safety Instructions Only use the appliance on a flat, level and stable surface. DO NOT use on a wet surface. When in operation the appliance surfaces are hot. DO NOT touch the sides or glass of the cabinet while the appliance is in operation. Open glass doors and gain access to the cabinet using the handles on the doors.
Operating Instructions for the Semak Pie Warmer Make sure that the knob is in the “OFF” position. is in the off position. Plug into an earthed 240V AC power supply. Turn the switch knob on the warmer until the dial reaches high for maximum heat.
SS Rear Panel 100 Capacity 50100 Wire Rack 50 capacity Spare Parts, exploded views and wiring diagrams are available from our webpage. Go to www.semak.com.au and locate the appliance in the product section for the above information. Page | 7...
CISPR 14 Warranty The Semak Pie Warmer is a Commercial appliance. This product is guaranteed for 1 Year* from the date of purchase against mechanical and electrical defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty are invalidated. If the product has been opened or tampered with (ie.
Page 9
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...