Memory Seats - Cadillac XTS 2019 Owner's Manual

Do not have a seatback reclined if the
vehicle is moving.

Memory Seats

Driver Buttons Shown, Passenger
Buttons Similar
If equipped, memory seats allow two
drivers to save and recall their unique
seat positions for driving the vehicle,
and a shared exit position for getting
out of the vehicle. Other feature
positions may also be saved, such as
power mirrors and power steering
wheel, if equipped. Memory positions
are linked to RKE transmitter 1 or 2
for automatic memory recalls.
Before saving, adjust all available
memory feature positions. Turn the
ignition on and then press and release
SEATS AND RESTRAINTS
SET; a beep will sound. Then
immediately press and hold 1, 2,
or (Exit) until two beeps sound.
To manually recall these positions,
press and hold 1, 2, or
saved position is reached. Follow the
instructions under Saving Memory
Positions.
The vehicle identifies the current
driver s RKE transmitter number (1
8). See Remote Keyless Entry (RKE)
System Operation 0 26. Only RKE
transmitters 1 and 2 can be used for
automatic memory recalls. A Driver
Information Center (DIC) welcome
message indicating the transmitter
number may display for the first few
ignition cycles following a transmitter
change. For Seat Entry Memory to
work properly, save the positions to
the memory button (1 or 2) matching
the RKE transmitter number displayed
in the DIC welcome message. Carry
the linked RKE transmitter when
entering the vehicle.
Memory adjustments may not be
available upon delivery or after service
until steps in Saving Memory
Positions section are performed.
57
until the