Table of Contents
Advertisement
Warning (Continued)
lane, or vehicle damage, injury,
or death could occur. Always keep
the windshield, headlamps, and
camera sensors clean and in good
repair. Do not use LDW in bad
weather conditions.
How the System Works
The LDW camera sensor is on the
windshield ahead of the rearview
mirror.
To turn LDW on and off, press
the center stack to the left of the
infotainment display. The control
indicator will light when LDW is on.
When LDW is on,
is green if LDW
is available to warn of a lane
departure. If the vehicle crosses a
detected lane marking without using
the turn signal in that direction,
changes to amber and flashes.
Additionally, there may be three
beeps, or the driver seat may pulse
three times, on the right or left,
depending on the lane departure
direction.
When the System Does Not
Seem to Work Properly
The system may not detect lanes as
well when there are:
Close vehicles ahead.
Sudden lighting changes, such as
on
when driving through tunnels.
Banked roads.
If the LDW system is not functioning
properly when lane markings are
clearly visible, cleaning the windshield
may help.
LDW alerts may occur due to tar
marks, shadows, cracks in the road,
temporary or construction lane
markings, or other road imperfections.
DRIVING AND OPERATING
This is normal system operation; the
vehicle does not need service. Turn
LDW off if these conditions continue.
209
Advertisement
Chapters
Table of Contents
