WaterTech REIONATOR PRO ULTRA RXU13 Installation And Service Manual page 14

SETTING HARDNESS, REGENERATION DAY AND REGENERATION TIME
The Triton control valve on your Reionator Pro Ultra
valve. However, there are certain settings that are specific to the customer's water situation that cannot be set at
the factory. This section will guide you through these settings.
IMPORTANT: Please be sure you know your water hardness before setting this screen. A hardness setting that is too low will result in depleted capacity
and water that is not softened. A hardness setting that is too high will result in more frequent regeneration and increased salt usage.
Step 1. To set the hardness on your Triton control valve, press the NEXT and
will see the display change from the time of day to the "Set HARDNESS" screen as above. Simply press
6
5
the or
Setting Up The Triton Valve
™
to change the grains per gallon of hardness.
comes pre-set from the factory to perform as a typical softener
5
14
buttons simultaneously. You