Pole Mounting (F-1300Btwp And F-1300Wtwp Only) - Toa F-1300B Operating Instructions Manual

8.6. Pole Mounting
To mount the speaker on a pole with diameter of 10 – 34 cm (3.94 –
13.39"), use the supplied wall bracket, joint bracket, and speaker bracket
in combination with the optional YS-60B Pole Band.
Speaker coverage angles can be adjusted in the horizontal and vertical
direction*.
* Horizontal: Max. 90º, Vertical: Max. 45º downward
Joint bracket
Speaker unit
Step 1. Attach the wall bracket to a pole using the YS-60B.
Match the orientation of the arrow label with the horizontal direction (left or right) the speaker faces.
• Arrow label orientation (Viewed from top of brackets)
[Left-facing orientation]
Arrow label
(F-1300BTWP and F-1300WTWP only)
Hexagon bolt M6 x 12
(with plain washer
and spring washer)
Wall bracket
4
6
3
[Speaker bracket mounting position]
Speaker bracket
Speaker (rear)
YS-60B
Wall bracket
Joint bracket
2
1
YS-60B (option)
2
Fixing bolt M5 x 60
Note
Set the speaker in a vertical
orientation, then attach the bracket
so that the rear-mounted terminal
cover is positioned above the mount.
Machine screw
M5 x 20 (with plain
washer and spring
washer)
[Right-facing orientation]
YS-60B
Wall bracket
Joint bracket
[Installation example]
Arrow label
13