Speaker Stand Mounting - Toa F-1300B Operating Instructions Manual

8.5. Speaker Stand Mounting

The speaker can be mounted on the optional ST-16A Speaker Stand using the supplied joint bracket and
speaker bracket.
Speaker unit
Machine screw
M5 x 20 (with
plain washer and
spring washer)
Butterfly nut
(supplied with
the ST-16A)
Washer
(supplied with
the ST-16A)
Joint bracket
Step 1. Attach the joint bracket to the speaker stand bracket using
the speaker stand's supplied bolt and nut.
Step 2. Attach the speaker bracket to the speaker's bottom using the
supplied screws.
Step 3. Mount the speaker to the joint bracket by inserting the
speaker bracket into the joint bracket and loosely securing
the fixing bolt for temporary speaker installation.
After adjusting the speaker's vertical mounting angle, tighten
the fixing bolt.
The speaker angle is adjustable in 7.5º steps.
The mating surfaces of the speaker bracket and joint bracket
are designed to interlock. Ensure that both parts are
securely engaged with each other after mounting is
complete.
Step 4. Connect the speaker cable to the input terminals.
Note
Use a terminal cover when installing the speaker outdoors.
(Refer to p. 6 for terminal cover attachment.)
Note
For more information on mounting the bracket to the stand and stand usage, refer to the instruction manual
enclosed with the ST-16A Speaker Stand.
12
A s h o l e s e a l s a r e
adhered over the holes,
remove them using a
p o i n t e d t o o l b e f o r e
attaching the bracket.
2
Speaker bracket
3
1
Bracket
(supplied with the ST-16A)
Hexagon bolt
(supplied with the ST-16A)
ST-16A (option)
3
Fixing bolt
M5 x 60
Note
Mount the speaker so that it faces
within the range of 15º upward and
downward.
[Speaker angle vs. Bracket position]
[Installation example]
a
º
15
º
15
b
a b
15º upward 15º downward
0°
30°
Speaker bracket
Joint bracket