Human Machine Interface (Hmi); Oil Bottles - Bosch ACS 151 Original Instructions Manual

en 8 | ACS 151 | Product description
Fig. 2: ACS 151 right view
1 Handle
2 Power inlet
3 Grip for RH panel
4 Hose holder
3.3.1

Human Machine Interface (HMI)

The HMI consists of:
R
Pressure gauges: The pressure during the service is
displayed on the gauges.
R
LCD: The menu options and status of service are
displayed on the LCD.
R
Status indication LEDs
LED Status Service status Action by user
Stop
indication Glowing Error
(Red)
Glowing Completion
In process
(Green)
In progress
Blinking
|
F 002 DG9 448 2018-02-01
1
R
Keys
2
3
4
R
R
3.3.2
!
Follow the instruc-
tions displayed on the
screen. Fig. 3:
or
1 Manual oil recharge valve
Refer chapter 5 for
2 Connector
more information
3 Oil level scale
about error codes.
Perform actions after
completion as indicat-
To detach the fresh oil bottle, pull the connector
ed in chapter 6.
(Fig. 3, Pos. 2) slightly downwards and pull down the
None
bottle.
Keypad: The selection of service menu options and
service parameters can be done via the keypad.
Description
REC Recover refrigerant from vehicle A/C system
VAC Perform vacuuming of vehicle A/C system
CHR
Recharge refrigerant to vehicle A/C system
z
R In edit mode
- press once to act as backspace.
- press twice to navigate to previous screen.
R If not in edit mode, press once to navigate to
previous screen.
Enter Enter
Abort Abort the service in progress
Master switch: Power on/ off the ACS 151.
Serial Port: It is used to update firmware, contact
Bosch customer service for firmware update.

Oil bottles

Do not apply excessive force while detaching or at-
taching the oil bottles.
Detaching the fresh oil bottle
1
2
3
Bosch Limited