Download Print this page

Black & Decker 90556294 Instruction Manual

Waxer/polisher
Hide thumbs

Advertisement

Quick Links

W
A
X
E
R
W
A
X
E
R
INSTRUCTION MANUAL
Catalog No. WP900
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent.
Please have the catalog number available when you call.
K
E
Y
I
N
F
O
R
M
A
T
I
O
K
E
Y
I
N
F
O
R
M
A
T
I
O
• Liquid wax is recommended for use with this polisher.
• For best results, use light pressure only, letting the polisher do the work.
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Cat No. WP900
Form # 90556294
Copyright © 2009 Black & Decker

General Power Tool Safety Warnings

WARNING! Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
c) Keep children and bystanders away while operating a power tool.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools.
b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
c) Do not expose power tools to rain or wet conditions.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
f) If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication.
b) Use personal protective equipment. Always wear eye protection.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
d) Remove any adjusting key or wrench before turning the power tool on.
e) Do not overreach. Keep proper footing and balance at all times.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
/
P
O
L
I
S
H
E
R
/
P
O
L
I
S
H
E
R
N
Y
O
U
S
H
O
U
L
D
K
N
Y
O
U
S
H
O
U
L
D
K
OCT. ʻ09
Printed in China
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
b) Do not use the power tool if the switch does not turn it on and off.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power toolʼs
operation. If damaged, have the power tool repaired before use.
f) Keep cutting tools sharp and clean.
g) Use the power tool, accessories and tool bits etc., in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts.
Specific Safety Rules
• Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
• Accessories must be rated for at least the speed recommended on the tool warning
label. Wheels and other accessories running over rated speed can fly apart and cause
injury.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed areas
with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
N
O
W
:
N
O
W
:
WARNING: Use of this tool can generate and/or disperse dust, which may cause seri-
ous and permanent respiratory or other injury. Always use NIOSH/OSHA approved respi-
ratory protection appropriate for the dust exposure. Direct particles away from face and body.
• Always wear eye protection.
• Be sure bonnet is snugly installed on pad.
• Keep hands and fingers away from rotating bonnet.
• Before turning the switch to the ON position, be sure the pad is free to revolve harmlessly.
• Inspect the bonnet frequently for wear, dirt or imbedded debris.
CAUTION: Do not allow the power cord to contact the rotating bonnet as it may become
quickly tangled around it. If this occurs, turn tool OFF and unplug the power cord before
attempting to untangle the cord. If the cord is damaged, have it repaired or replaced at your
local tool repair station.
• Never use a damaged or torn bonnet.
• Wear proper clothing, short sleeves, nothing loose or bulky, such as shop coat, etc.
• Do not turn tool on unless the polishing bonnet is against surface being polished.
• Be extremely careful when polishing around sharp or protruding objects on the car body.
• This product is designed as a polisher only. Do not use as a sander.
CAUTION: Do not use abrasive or rubbing compounds. The abrasive nature of these
products can damage painted surfaces.
CAUTION: Wear appropriate hearing protection during use. Under some conditions and
duration of use, noise from this product may contribute to hearing loss.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual.
The information it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this information.
DANGER:
in death or serious injury.
WARNING:
result in death or serious injury.
CAUTION:
in minor or mod er ate injury.
CAUTION:
Used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage
Symbols
Indicates an imminently hazardous situation which, if not avoided, will result
Indicates a potentially hazardous situation which, if not avoided, could
Indicates a potentially haz ard ous situation which, if not avoided, may result
..........

Advertisement

loading

  Summary of Contents for Black & Decker 90556294

  • Page 1: General Power Tool Safety Warnings

    • Be extremely careful when polishing around sharp or protruding objects on the car body. • This product is designed as a polisher only. Do not use as a sander. CAUTION: Do not use abrasive or rubbing compounds. The abrasive nature of these products can damage painted surfaces.
  • Page 2: Troubleshooting

    Descriptions Figure 1 A. Pad B. Front handle C. On/Off switch D. End handle E. Foam applicator bonnet F. Polishing Bonnet USE OF EXTENSION CORDS Make sure the extension cord is in good condition before using. Always use the proper size extension cords with the tool – that is, proper wire size for various lengths of cord and heavy enough to carry the current the tool will draw.
  • Page 3: Règles De Sécurité Spécifiques

    MODE D’EMPLOI N° de catalogue WP900 Merci d’avoir choisi Black & Decker! Consulter le site Web www.BlackandDecker.com/NewOwner pour enregistrer votre nouveau produit. À LIRE AVANT DE RETOURNER CE PRODUIT POUR QUELQUE RAISON QUE CE SOIT : Si des questions ou des problèmes surgissent après l’achat d’un produit Black & Decker, consulter le site Web HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS pour obtenir des réponses instantanément 24 heures par jour.
  • Page 4: Dépannage

    MOTEUR Sʼassurer que lʼintensité nominale du cordon dʼalimentation correspond à celle indiquée sur la plaque signalétique; sur cette dernière, la mention «120 V c.a.» signifie que lʼoutil ne doit être branché que dans une prise résidentielle standard de courant alternatif de 60 Hz et non pas dans une prise de courant continu, alors que «120 V c.a.
  • Page 5: Normas De Seguridad Específicas

    e) Al operar una herramienta eléctrica en el exterior, utilice un cable prolongador adecuado para tal uso. f) Si el uso de una herramienta eléctrica en un lugar húmedo es imposible de evitar, utilice un suministro protegido con un dispositivo de corriente residual (RCD).
  • Page 6: Detección De Problemas

    secadora eléctrica como artículo delicado pero se recomienda el secado al aire libre. · Los aplicadores de espuma (E) están diseñados para ser utilizados sólo una vez, deséchelos después de su uso. · NO UTILIZAR PRODUCTOS ABRASIVOS. Se recomienda la cera líquida para esta lustradora.

This manual is also suitable for:

Wp900