Page 2
Smart Scenario Switch WSS-4E-ZBS Smart Scenario Switch (WSS-4E-ZBS) WSS-4E-ZBS is a ZigBee Four Touch Button Scenario Switch designed to control a group of pre-programmed home automation devices by simply pressing the scenario touch buttons under the same ZigBee network. The Scenario Switch utilizes ZigBee technology for wireless signal transmission. ZigBee is a wireless communication protocol that is reliable and has low power consumption and high transmission efficiency.
NookBox Installation Guide Smart Scenario Switch WSS-4E-ZBS Device Introduction 1. Scenario LED There are four Scenario LEDs, the LED will light up according to the correspondent Scenario touch button pressed. When the Scenario Switch receives acknowledge from the Control Panel after a button press, it will flash once and emit a beep as indica- tion.
Page 4
NookBox Installation Guide Smart Scenario Switch WSS-4E-ZBS Features Battery and Low Battery Detection The Scenario Switch uses two 1.5V AA Alkaline batteries as its power source. The Scenario Switch feature Low Battery Detection function. When the battery voltage is low, the Scenario Switch will transmit Low Battery signal to the ZigBee network coordinator.
NookBox Installation Guide Smart Scenario Switch WSS-4E-ZBS Installation The Scenario Switch is designed to be mounted on a flat surface with fixing screws. The base has 3 knockouts, where the plastic is thinner, for mounting purpose. Remove the cover by using a screwdriver.