Operation - Bosch Rexroth WSC60HA Instructions Manual

Welding cabinet/suspended station/standing cabinet
Table of Contents

Advertisement

Available languages

Available languages

66/73
Bosch Rexroth AG

Operation

Dangerous electrical voltage
Possibility of cardiac arrhythmia, burns, shock!
Never interpret the extinguishing of all LEDs on the product as
zero voltage!
Please note that the voltage inside the unit directly after switching
off the mains supply has not been reduced to a harmless level yet.
Do not touch either mains or transformer connections for at least 5
minutes after switching the mains supply off.
Use suitable measuring equipment and an appropriate measuring
method to ensure that the unit is de-energized before carrying
out any work on the unit.
9
Operation
Please note the safety instructions listed in Section 2.6.5 Operating the product.
The conditions for operation are provided in the Instructions of the respective
timer, refer to Table 1 Required and supplementary documentation.
Before starting work, check the system for damage adequately and properly (e.g.
visually).
Report any damage and faults in the system to your
maintenance and repair department immediately!
Before cleaning or prolonged service interruptions the system must be switched
off via its main switch and secured against arbitrary / unintentional restart!
R911345359 | WSC60GK/HA/ST
WARNING

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Rexroth wsc60gkRexroth wsc60st

Table of Contents