Cisco 4492R Regulatory Compliance And Safety Information Manual page 38

EMC Environmental Conditions for Products Installed in the European Union
Table 1
Item
Regulatory compliance Products with the CE Marking indicate compliance with the 89/336/EEC and
Safety
EMC
EMC Environmental Conditions for Products Installed in the
European Union
This section applies to products to be installed in the European Union.
The equipment is intended to operate under the following environmental conditions with respect to
EMC:
•
•
•
In addition, if equipment is operated in a domestic environment, interference may occur.
EMC Class A Notices and Warnings
This section includes the EMC Class A warnings for the Cisco Global Site Selector 4492R.
Class A Notice for FCC
Modifying the equipment without Cisco's authorization may result in the equipment no longer
complying with FCC requirements for Class A digital devices. In that event, your right to use the
equipment may be limited by FCC regulations, and you may be required to correct any interference to
radio or television communications at your own expense.
Regulatory Compliance and Safety Information for the Cisco Global Site Selector 4492R
38
Regulatory Standards Compliance
Description
73/23/EEC directives, which include the safety and EMC standards listed.
UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
AS/NZS 60950
FCC Part 15 (CFR 47) Class A
EN55022 Class A
CISPR 22 Class A
CNS13438 Class A
AS/NZS CISPR22 Class A
VCCI Class A
ICES-003 Class A
CISPR24
EN 55024
EN 61000-3-2
EN 61000-3-3
The equipment shall be located in a separate defined area under the user's control.
Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.
AC power distribution shall be one of the following types, where applicable: TN-S and TN-C as
defined in IEC 364-3.
78-17975-01