INTRODUCTION Thank you for having chosen the item. You will see you have acquired a powerful and versatile device. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.
Page 3
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected. Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.
Control channel 12—BLUE dimmer from 0-100% Control channel 13—master dimmer from 0-100% Control channel 14—strobe Control channel 15—14 preset shows LED DISPLAY: 1. Press the button MENU till it shows ADDR and -001, then confirm the desired address by the buttons UP and DOWN and ENTER. 2.
Need help?
Do you have a question about the COLOR HYPERION and is the answer not in the manual?
Questions and answers